Glass spider is an important accessory to connect glass curtain wall,which are mainly used as supporting routels,and load is transferred to a fixed supporting structure system.
Surface treatment of glass spider:
(Make the surface of stainless steel connecting claw more colorful;
Force characteristics of glass:tension plate is better than compression plate.
It is said that the glass spider of point glass curtain wall must be installed on the top of the glass panel with a long waist hole.
Distance of glass spider
1.The distance between supporting hole edge and plate edge of glass panel should not be less than 70 mm.
2.Most of the glass routels need the hole diameter on the glass to be 36mm, and the minimum width of the glue joint of curtain wall should not be less than 10mm. The distaince of holes of glass spider should not be less than (70mm 2)+36mm+10mm=186mm. Therefore, 200 series of glass spider can meet the requirements. At the same time, we will also find that the usual distance between the holes of glass spider is more than 200mm.
What is glass routel:
Metal fittings are separated from metal fittings by flexible gaskets or plastic washers,the glass hole is made by material of routel;the material fixed on the glass spider can eliminate the unfavourable factors caused by glass deformation of glass.There are 3 kinds of glass routels:1.Flat cap routel;2.Countersunk routel;3.Seam clip type routel;
Shower Hinge Features:Refined by using stainless steel;Through sophisticated lost-wax casting,meticulously polishing materials,simple and elegant tables,solid and durable,corrosion resistant.slotting one-way in the connection between glass and glass door;Open-close is over 2000 thousand times;Applicable for glass and glass connection of flat bathroon,glass door(Also called 180° clamp)Specification is 100 x 100,can keep closed position,and hold open at 90 °position inside or outside;Fit for 10~12mm thickness glass door;Max Bearing weight:40kg/pairs;
Address：#480 East Beijing Rd,Huangpu District,Shanghai,China